hobby lathe, cork only? |
|
|
  |
hobby lathe, cork only? |
 Dec 10 2007, 10:58 PM
Post
#1
|
|
|
Group: Members Posts: 4 Joined: 29-November 07 Member No.: 12972  |
i searched through the forum but did not notice if anyone has used the hobby lathe on the grizzly site for turning inserts?? or if it was just for handles..... I assume some wood is harder than others and its not "great" for turning inserts all the time
|
 |
 
|
|
Dec 11 2007, 12:09 AM
Post
#2
|
|
 Group: Members Posts: 433 Joined: 11-May 07 Member No.: 11278 |
I dont have much experience with lathes, but I got mine at harbor freight for $90. It works great for fly fishing stuff, and its a nice size. Wait for a sale, mine was 50% off. I know that didn't really answer your question, but I hope it helps.
scott -------------------- "Any society that would give up a little liberty to gain a little security will deserve neither and lose both. "
- Benjamin Franklin |
|
|
|
|
Dec 11 2007, 06:02 AM
Post
#3
|
|
 I don't have an addictive personality, I just have a lot of addictions! Group: Members Posts: 1130 Joined: 2-January 04 From: Plattsville, On, Canada Member No.: 412 |
Grizzly makes some not bad tools. You can use any type of wood you like for inserts and handles. It's more about the look of the wood than the durability, as long as you put a good finish on it you should have no trouble.
Paul -------------------- It is impossible to know where your going if you don't know where you've been!
|
|
|
|
|
Dec 11 2007, 12:29 PM
Post
#4
|
|
 Group: Members Posts: 147 Joined: 26-August 04 From: Lisle, IL - SW Michigan on the Weekends Member No.: 1249 |
I originally ordered one and sent it back as the Jet Lathe went on sale at Woodcraft and made the plunge. I don't think turning some hardwoods on it will suit your needs. As a cork turning machine it is seems fine. Also make sure you get the proper drill to fit the Grizzly.
Before you buy check out Woodcraft and Rockler for deals on lathes such as Jet and Rikon. Also Rockler has a house brand that is very similiar to the Jet. |
|
|
|
|
Dec 11 2007, 10:56 PM
Post
#5
|
|
|
Group: Members Posts: 567 Joined: 6-September 07 From: Shendoah Valley, VA Member No.: 12212 |
I have a grizzly hobby lathe
its capabilities are controlled a lot by the power source (drill). on that note, I've turned cork, multiple barks, maple, pine and walnut good sharp tools help having said that...if you can find a jet or rikon or other "real" lathe at a price you can swallow, get it. it'll do you better for longer, especially if you let the turning get into your blood like it tends to do and take on more projects -------------------- Josh - reminding you to check the guide alignments before putting on your finish
|
|
|
|
|
Dec 12 2007, 11:14 AM
Post
#6
|
|
 Group: Members Posts: 27 Joined: 27-June 06 Member No.: 5577 |
I have two jet lathes JML1014 I purchase, one about 6 years ago and one 3 years ago both from Amazon .com where they have FREE SHIPPING.
Both lathe work great I’ve turned all kinds of handles and reel seats like acrylic, wood, cork, even turn screwdriver handles down for reel seats. There are a lot of good lathes out there. What ever lathe you get be sure to get good quality cutting tools, I learned the hard way. (Amazon.com Jet Lathe) http://www.amazon.com/JET-1014I-Inch-Index...3859&sr=1-1 Lynn |
|
|
|
|
Dec 12 2007, 11:24 AM
Post
#7
|
|
|
Group: Members Posts: 4 Joined: 29-November 07 Member No.: 12972 |
Thanks for all the great info.... I think I will start with the hobby lathe and start off with handles and let the addiction take over from.
(Hey kid, first one's free....  )
|
|
|
|
|
|
Lo-Fi Version | Time is now: 30th July 2010 - 12:38 AM |
