Jump to content


8weight

Member Since 15 Aug 2009
Offline Last Active Mar 30 2017 04:31 PM
-----

Topics I've Started

8013

23 April 2014 - 03:13 PM

Here is a Dickerson 8013 Flamed and hollow scalloped. Made reel seat hardware and ferrules from duronze. Wrapped in Gudbrod 2/0 Nylon tipped with Gossamer Black. Reel seat timber made from Sandalwood.

Thanks,
Anthony

Gould 7' Strong Special

02 April 2014 - 08:29 PM

Here is a 7' #4/5 weight. Also posted on the other forum. It is based on Ray Gould's Strong Special taper. This is fast rod. I made reel seat hardware and guides from brass. The rod is hollow scalloped and wrapped in amber tipped with classic chestnut.
Thanks,
Anthony

Payne 102 guide space chart?

14 August 2013 - 12:41 PM

Next rod on the list to build is a Payne 102. Anyone have an original guide space chart for this rod. Any help is appreciated.

Thanks,
Anthony

7' 10" 3/4

12 August 2013 - 11:03 PM

Here is a 7'10" 3/4 weight. I made the reel seat and spacer from Spanish Cedar and Duronze. The stripping guide is REC. Wraps are Gossamer with tipping only at the cork. I usually make my stepdown ferrules but, I had a set of Rush River ferrules so I used those. Rod is also hollow scalloped through the butt section.

Thanks for looking,
Anthony