Jump to content


Photo

Applying Color Preserver


  • This topic is locked This topic is locked
No replies to this topic

#1 OSD

OSD
  • Super Moderators
  • 6,003 posts

Posted 30 April 2005 - 07:28 PM

I use Flex Coat Color Perserver & Thread Sealer

user posted image

I have had good luck with the Flex coat products and believe I have mastered applying the CP. without getting the milky looking wraps
(Which I have heard some builders complain about)

This is my method of applying it; I call it the (karate kid method)

First I apply a saturating coat of CP to the wrap

user posted image

Them once I have the wrap saturated I wipe the brush off and take off the excess CP that is left on the surface

user posted image

user posted image

(karate kid method)
Wax on wax off

user posted image

I will let the CP dry for 12 hours before apply finish
I know allot of you have read the direction about multiple coats
But with just a single one thread wrap (not any over wraps or compound wraps where this is more thread built up like butt wraps)
One coat is all I ever use.

Bob




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users