Jump to content

Greg LaPolla

Member Since 24 Oct 2011
Offline Last Active Jan 21 2020 05:05 PM

Posts I've Made

In Topic: Fenwick Spinning Rod Guide

24 March 2018 - 08:04 PM



The guide in front is .335.  The guide behind is the bottom most guide at .875.  The wire gauge on the guide is 030.  The broken guide is the last one on the top section.  The bottom section only has one guide.



In Topic: Fenwick Spinning Rod Guide

22 March 2018 - 07:18 PM

SS304 is on the newer ones  This one is the foul-proof type  I think they are called Aetna foulproof



In Topic: Cutting open a made-up cork grip?

16 August 2017 - 07:40 PM

Very sharp parting tool or skew.

In Topic: Bubble-Less Epoxy

29 July 2017 - 09:29 PM

I Always use a bubble buster after applying epoxy.  Shoot the flame abut 1/2 to 3/4 of an inch above the epoxy and it will pull the bubbles right out.

In Topic: Cork ring glue

28 July 2017 - 09:36 PM

I prefer Titebond III because its waterproof.  I do use Rod Bond epoxy to glue the grip to the blank though.